This receiver feature up to 9 favorite programmable channels, up to 24 channels can be parentally locked out, C/Ku-Band compatible, audio/video outputs and up to 21 programmable satellites.

LEGEND

Blue = Buttons on Remote or Receiver

HOW TO PROGRAM A SATELLITE

1. Go to a satellite next to or near the one you want to find.  It is easier if you start on a satellite that has the same polarity format.  Press and hold MEMORY LOCK on the front of the receiver until the memory lock light goes out.

2. If you start on a satellite that is the same polarity format, tap EAST/ WEST until you find the correct satellite.  If you start on a satellite that is the opposite polarity format, tap EAST/WEST until you lose the picture, then press POLARITY on the receiver one time. Use EAST/WEST until you find the correct satellite.

3. To name the satellite, tap LETTER on the front of the receiver until you see the correct letter in the display panel.   Then tap NUMBER on the front of the receiver until you see the correct number in the display panel.  Then press ENTER on the front of the receiver until the display panel flashes.

4. Press MEMORY LOCK on the front of the receiver until the memory lock light comes back on.