   
|
     
|
(This is a receiver only. It will have a separate descrambler
and dish positioner)
BUTTONS ON THE RECEIVER
- Power - On or Off (has an indicator light)
- Scan - Used to scan complete channel range in 1 sec. when aiming the antenna.
- 6.8 - Push in to select that preset audio.
- Format - Used to select Horizontal or Vertical polarity.
KNOBS ON THE RECEIVER
- Audio Tune - Used to adjust the audio subcarrier frequency between 5.4 - 8.2 MHz. The 6.8 button must be out to tune.
- Fine Tune - Used to adjust the fine tuning on a channel.
- Channel Selector w/ display - Use to change channels.
- Polarity - Use to adjust the skew.
|
About Us /
Contact Us /
Home /
Technical Q & A
©2006, Superstar/Netlink Group
|