This receiver is like a Drake 924. It has an Alpha, NUM, Memory (hold until it blinks), Format, Cancel, Skew +/-, AUTO (turns auto light on/off).

 
LEGEND
Blue = Buttons on Remote or Receiver

HOW TO PROGRAM A SATELLITE

1. You can start from any satellite. The satellite does not have to be erased.

2. Press auto and turn the Auto Light off.

3. Press the left or right arrow on the receiver until a picture is found. You cannot use left/right on the remote.

4. Press FORMAT to reverse the polarity if necessary.

5. To store the satellite: Press ALPHA and then NUM until desired satellite is up.

6. Press and hold MEMORY until the name blinks.

7. Press auto and turn the Auto Light on.