LEGEND
Blue = Buttons on Remote or Receiver

Satellites cannot be programmed into this receiver, the customer will have a list of satellites with the corresponding dish position number. 

To move the dish east or west: press SAT, then use up/down arrows to move the dish in appropriate direction. The range is from 0 to 255. After moving the customer will need to press CHAN to enable the up/down buttons to change channels again. 

To auto tune the dish: press SAT, then F-TUNE. When the best picture is found, have the customer remember the position number. 

To reverse polarity: press FORMAT on the remote. 

To adjust the skew: use SKEW up/down to adjust. The skew will be displayed on the screen while adjusting. The changes are stored automatically.

To video fine tune: press F-TUNE on the remote. “FIN” will come up on the receiver display. Use up/down buttons to adjust the video.

To change the audio: press FREQ to display the current audio frequency. Press FREQ, then direct enter the desired audio frequency, or use up/down buttons to tune the frequency, or press SEEK to search for a frequency. 

NO PARENTAL LOCKS

NO TI FILTER