Channel Master 6130

(This is a receiver only and will have a separate dish positioner)

BUTTONS ON THE RECEVIER

Power - On or Off
Format - Used to select the reversed polarity when in (Galaxy), or normal polarity when out (Satcom).
Scan - Used to scan the horizontal channels when aiming the antenna.
6.8 - Push in to select that preset audio.
6.2 - Push in to select that preset audio.
Manual - Push in to allow audio tuning, use with the audio tuning knob.
Channel Up/Down - Used to change channels

KNOBS ON THE RECEIVER

Audio Tune - Used to adjust the audio subcarrier frequency between 5.5 - 8.0 MHz
Fine Tune - Used to adjust the fine tuning on a channel.

METERS ON THE RECEIVER

Signal Strength LED Readout - Displays the strength of the signal received. Used as an aid in aiming the dish or, as an overall indication of system performance.
Center Tune LED Readout - Used with the fine tune knob for indication of optimum tuning on a channel. The green center LED will illuminate when it is centered.

BUTTONS ON THE REMOTE

Š2006, Superstar/Netlink Group

This site is brought to you courtesy of:
Superstar/Netlink Group.
Disclaimer / Privacy Statement