LEGEND
Blue = Buttons on Remote or Receiver

HOW TO PROGRAM A SATELLITE

1. Go to a satellite with the same polarity that is near to the satellite to be programmed.

2. Select a channel that is active on the satellite to be programmed and on the satellite you are starting on.

3. Tap EAST or WEST until a different picture appears.

4. After finding the correct satellite go to step 5 to store it. If you are picking up the satellites with the opposite polarity, then press POLARITY one time to reverse the format. Continue to move until the correct satellite is found.

5. Press TYPE then NUMBER to select the correct name for the satellite to be programmed.